Nitek VH3200 Card Cage for UTP

Reference: VH3200

Condition: New product


A 32 port powered video hub w/ built-in surge suppression and video detection. MADE IN USA

12 Items


By buying this product you can collect up to 55 loyalty points. Your cart will total 55 points that can be converted into a voucher of $11.00.

Volume discounts

Quantity Price You Save
2 $450.00 Up to $200.00

More info

The VH3200 is a 32 port powered video hub with built-in surge suppression and video detection. Systems operate with other Nitek UTP video equipment including, Video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.
The VH3200 series UTP modular hub system holds up to four VB41x8, TR515x8 or TR560x8 8 channel video receiver cards in any combination, for a total of 32 input ports. The VB41x8 can be used on video runs up to 750 feet (225 meters). The TR515x8 can be used up to 1,500 feet (450 meters) with passive transmitters. The TR560x8 can be used up to 3,000 feet (900 meters) with passive transmitters and up to 6,000 feet (1,800 meters) with the NITEK TT560 active transmitter.

  • Quality video over ordinary twisted pair cable
  • Immunity to noise and interference
  • Built-in surge suppression on VB39 models
  • Passive devices – do not require power
  • Video & P/T/Z over a single pair (with up-the-coax systems)
  • M – version mounts directly to camera or video source
  • Weatherproof design
  • Easier to install than coax
  • Made in the U.S.A.


Transceiver Unit
Size 1 RU x 6.0″ (D)
Power Requirements 24 VAC @ 800mA
(Wall transformer provided with unit)
Video Input Balanced low voltage current loop
Video Output 1 Vpp composite video
monochrome or color
Common Mode
Video Format RS170, NTSC, PAL, SECAM,
CCIR (Color or B/W)
Twisted Pair
Screw terminals providing balanced low voltage current loop
Operating Frequency DC to 10 MHz
Temperature Range -20 degrees C to +55 degrees C
Humidity Range 0 to 98% non-condensing
Enclosure Type Standard 19″ rack 1 RU in height
Wire Spec 26 to 12 AWG Unshielded
Twisted Pair (UTP)
DC Loop Resistance 51 Ohms/1,000 feet (max)
(51 Ohms/300 meters)
Normal Capacitance 17pF/ft.
Impedence 100 Ohms +/- 20%
UTP Category 2 or better



Specifications for the Nitek VH3200

Download (176.01k)

Installation Instructions for the Nitek VH3200 UTP Card Cage

Download (77.83k)